For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-81963 Servocomponents, Precision Instrument, Rotating, Common Requirements And Tests, General Specification ForThis specification covers common requirements and tests for analog, digital and analog/digital precision instrument rotating servocomponents \(synchros, electrical resolvers, electrical, linear resolvers, transolvers, shaft angle encoders, servomotors, tachometer-generators, servomotor-tachometer generators, stepping motors, and gear heads\). This specification will be used with the applicable general specification, which covers a particular class of servocomponents \(for example, synchros\), together with the documents and the specification sheet that cite MIL-DTL-81963 as a direct reference detailing the specific requirement for the individual servocomponent.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19


. . .
MIL-DTL-81963C
MIL-S-22432
-
Servomotor, General Specification for
MIL-S-22820
-
Servomotor-Tachometer-Generator AC, General Specification for
MIL-T-22821
-
Tachometer-Generator AC, General Specification for
MIL-B-81793
-
Bearing, Ball, Precision, for Instrument and Rotating Components
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of U. S. Military Property
MIL-STD-202
-
Test Method Standard Electronic and Electrical Component Parts
MIL-STD-461
-
Requirements for the Control of Electromagnetic Interference
Characteristics of Subsystems and Equipment
MIL-STD-740
-
Airborne and Structureborne Noise Measurements and Acceptance
Criteria of Shipboard Equipment
MS17183
-
Clamp Assembly (Synchro)
(Copies of these documents are available online at https://assist.daps.dla.mil from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents from a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/NEMA MW 1000 -
Magnet Wire
ANSI S1.11
-
Specification for Octave, Half-Octave, and Third-Octave Band Filter Sets
(Copies of these documents are available online at https://www.ansi.org or from the American National
th
Standard Institute, 25 West 43 Street, 4 Floor, New York, NY 10036.)
ASME INTERNATIONAL
ASME Y14.5M
-
Dimensioning and Tolerancing
(Copies of these documents are available online at https://www.asme.org or from the ASME
International, Three Park Avenue, New York, NY 10016-5990.)
ASTM INTERNATIONAL
ASTM A582/A582M
-
Free Machining Stainless Steel Bars
ASTM B21/B21M
-
Naval Brass Rod, Bar, and Shapes
ASTM B209
-
Aluminum and Aluminum-Alloy Sheet and Plate, Alloy 2024
ASTM E18
-
Rockwell Hardness of Metallic Materials
2



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.